1. Introduction
1.1 Profile
The AN-307 LoRaWAN Siren makes light and sound to tell the guard management there is an alert. It supports standard LoRaWAN protocol. It has high detection accuracy. With a durable shell, it has a long life span.
Application
Typically installed on wall. For example, you can get an alert on the management platform immediately if a window open when you go to bed, or if you leave home without closing the back door.
1.2 Feature
1) Support LoRaWANTM
2) Frequency: CN470/AS923/ EU868/US915/AU915 optional
1.3 Specification
Description | Item | Performance |
Radio performance | Transfer rate | 300bps~5.4Kbps |
Protocol | LoRaWAN 1.0.2/ 1.0.3 | |
Frequency | CN470MHz~510MHz | |
EU863MHz~870MHz | ||
US902MHz~928MHz | ||
AU915MHz~928MHz | ||
AS920MHz~925MHz | ||
Max Tx Power | 20dBm( 17dBm in default) | |
Max link budget | 167dB | |
Rx sensitivity | - 141dBm(SF= 12) | |
LoRa | Built-in | |
antenna | ||
Working condition | Temperature | - 10C~ +55C |
Humidity | ≤95％RH(non-condensation) | |
Power | Power supply | DC12V (with an adaptor optional) |
Current | Working current | ≤28mA |
Tx current | ≤125mA | |
Size | 125x125x47(mm) | |
Light alarm | 120 times/minute ±10％ | |
Flash energy | ≥1.2WS | |
Siren | ≥110dB | |
volume | ||
Sounds optional | Police sound effect; |
2. Structure
2.1 Dimension
2.2 Install and wiring
1. Before installation, please check if the device intact with full accessory kits.
2. The alarm shall be installed on the wall. It is recommended to be fixed as 0.2m away from the ceiling.
3. During installation, fix the device mounting plate to the embedded 86H50 junction box into the wall with two screws.
4. Connect the cable to the corresponding terminal through the inlet hole of the device base. Then clip device with the bottom and put it on the base plate. Gently press the top of the device to fix.
5. Gently press the top or bottom of the device for disassembling.
6. The power cord uses BV wire with the cross-sectional area as ≥ 1.5mm2.
